Technology · Optional add-on

Add water softening to any Purus.

Purus takes out what makes water cloudy. Softening takes out what makes it hard. A softener after the Purus outlet removes the calcium and magnesium that scale chillers, cooling towers and boilers, and the clear Purus water in front of it protects the resin.

How it works

Filter it clear. Then soften it.

Hardness is dissolved, so it passes straight through Purus. A softener swaps the calcium and magnesium ions for sodium as the water flows through a bed of ion-exchange resin, then regenerates itself with salt brine. Running it on Purus filtrate keeps silt and colloids off the resin.

Stage 1 · Purus

Removes what clouds

Particles, colloids and most microorganisms are held back by the gel membrane, so the resin bed is not fouled by suspended solids.

Stage 2 · Softener

Removes what scales

Ion-exchange resin takes out calcium and magnesium hardness, the main scale formers on heat-exchange surfaces.

Regeneration

Looks after itself

An automatic control valve regenerates the resin with salt brine on volume or time. Twin-vessel units keep soft water flowing while one vessel regenerates.

Matching the softener

A softener for each Purus model.

Softeners are sized to the full Purus flow and to the hardness of your water, which sets how often the resin regenerates.

Purus modelDesign peak flowSoftener
Purus 20.1~1.5 m³/hSingle vessel, rated to ~2 m³/h
Purus 50.2~5.5 m³/hTwin vessel, rated to ~6 m³/h
Purus 100.5~8.5 m³/hMulti-vessel, rated to ~10 m³/h
Purus 100.20~8.5 m³/hMulti-vessel, rated to ~10 m³/h

Planning selection only. The final softener is confirmed by Blue Quest engineering against a hardness test of your water and your daily volume.

Good to know

Where softening adds the most.

Where it fits

Chiller, cooling-tower and boiler make-up water, and ahead of reverse osmosis on hard water, for industrial and process sites.

What it doesn’t do

Softening swaps hardness for sodium; it does not lower total dissolved salts. That is a job for reverse osmosis.

Brine and approvals

Regeneration produces a salty rinse that goes to sewer under your site’s trade-waste arrangements. We size the softener to keep it to what the duty needs.

Built for Australian sites

Where the unit is powered, its controls are checked, upgraded where needed and certified to Australian standards by a licensed electrician before installation, and the softener reports to the Purus controller.

Add softening to your package.

Tell us in your enquiry and the softener is quoted with your Purus package after a hardness test of your water.